HHO Welding Machine Used Jiang Huai Electric Motor "Digital Workshop" -motor enamel wire welding

HHO Welding Machine Used Electric Motor "Digital Workshop" for Double Improvement of Work Efficiency

2019-07-16

Okay Energy hho welding machines is used in Jiang Huai Electric Motor "Digital Workshop" to realize the double improvement of work efficiency.

Under the new conception of Chinese intelligent manufacturing,the traditonal electric motor manufacturers face great challenges. The production process should be innovated and production equipments should be digital intellgence to improve work efficience.
For the automatic digital workshop,the 1 set of oxyhydrogen generator is used for one automatic motor production line with several workstations,which called large-scale centralized gas supply scheme. Each workstation should have enough flame power to braze the same or different size of electric motor magnet wire. The oxyhydrogen generators should have stable oxyhydrogen flame,and gas output is adjustable. The smart flame regulator can realize the stable gas pressure and inteligent anti-backfire protection. The start up unit can meet the requirements of automatic ignition on and off.

Large-scale centralized gas supply scheme

What is the project schedule of oxyhydrogen generator for electric motor production workshop?
Firstly,our engineers propose the diagrammatic of large-scale centralized gas supply scheme and recommend suitable oxyhydrogen generator according to the layout of production line and the number of workstation.
The one set of OH10000 oxyhydrogen generator should meet the brazing work for 10 workstations together in Jiang Huai "Digital Workshop".

Another chanlleage we face is that the welding workers are skilled at traditional oxyacetylene welding not oxyhydrogen welding. We will provide door-door installation and training service to the manufacturer in the final stage.

Okay Energy after-sales engineer onsite machine training

Oxyhydrogen brazing demonstration

Okay Energy oxyhydrogen welding machine features:

1.The gas used for oxhyhdrogen welding is made on demand, produced at startup, supplied at low pressure, shut down and stopped, and stored no nothing. Therefore, there is no danger of explosion.
2.The working medium is pure water. It become water vapor after combustion without any harm to human body and environment.
3.The temperature of oxhyhrogen flame up to 2800℃， flame concentration, improving the welding speed of 50%.
4.The raw material is only a small amount of water and a little amount of electricity, reducing the cost by 30%.
5.The oxyhydrogen flame will burn off magnet wire enamel automatically, reducing the process of enamel stripping before welding.
6.The oxyhydrogen flame welding is reliable and firm, ensuring that the electromechanical can work for a long time, reducing the electromechanical failure rate by 90%.
7.The oxyhydrogen flame is suitable for welding two or more enameled wires with different diameters.

How to select oxyhydrogen generators for electric motors?
The below reference is standard for motor frame selection

Engine base	Wire gauge	Outlet	Applicable model
56	1-0.31	0.5	OH300/400
63	1-0.35	0.5
71	1-0.5	0.5
80	2-0.56	0.75
90	3-0.63	1.5
100	3-0.75	1.5
112	2-0.71	2.5
132	3-0.95	2.5
160	8-0.8	4	OH800/1000
180	5-1.0	10
200	6-0.75	16
225	13-1.06	16
250	22-1.18	35	OH1500/2000
280	17-1.06	35	OH1500/2000
315	16-1.5	70	OH3000
355	75-1.5	70	OH3000

Last:

Ukraine Customers Visit Okay New Factory About hho oxy-hydrogen machine

Back to list

How to use oxyhydrogen generator for electric motor enamel copper wire welding